Frequently asked questions

Every space built by people should offer an ideal environment for working, living and resting. The most important factor for well-being in any space is the condition of the air inside it, above all its temperature, together with its humidity. For most people, the most comfortable temperature is between 22 and 25 °C. Architects and builders have always looked for ways to keep spaces at the right temperature with different devices. One of the most important ways to achieve this is to choose the right cooling system for each space.

Cooling your space should not be a luxury, yet the monthly bill has become one of the biggest expenses of any home, office or workshop. How many times have you put up with the heat rather than switch on the air conditioning for fear of the electricity bill? It is a fact: many people install cooling systems they then do not dare to use. We have the definitive solution. With PARS EcoTech evaporative cooling systems, you can keep your space cool all the time with very low electricity use. Switch it on, enjoy natural comfort and forget about high bills.

Very little: up to 90% less than conventional air conditioning. For example, a cooler for 70–100 square metres uses as much energy as one or two light bulbs.

Very little. For example, in the hottest hours of the hottest day of the year, small and medium-sized models use 6 to 10 litres per hour, about the same as one flush of a toilet cistern.

Yes. The biggest benefit of this system is that the air in your space is renewed all the time: fresh air comes in from outside, is cooled and sent indoors, and the warm air leaves through the window, which ensures good ventilation. This matters for health, because common air conditioners recirculate the indoor air and, if the space is not ventilated, dryness and headaches can appear after a few hours.

No. Quite the opposite: doors or windows must be open so that the air is renewed. For the best effect, it is enough to open one window or door on the side opposite the cooler, so that the air leaves through it and the whole space cools evenly.

Yes, because new air enters the space all the time. Odours and indoor pollutants (tobacco smoke, cooking smells, etc.) leave quickly and the air stays fresh. This ventilation also reduces the concentration of microbes in the indoor air.

Yes. As they cool the air, they also humidify it. In dry climates this helps keep a pleasant relative humidity and prevents the feeling of dry eyes and a dry throat.

No, because the indoor air is renewed: fresh air comes in all the time and stale air leaves through the window, so humidity does not build up indoors. Even so, when humidity is high (above 80%), you can switch off the water pump to keep humidity from building up.

Very simple. They need little maintenance: just clean the tank and the pads from time to time. There is no compressor. There is no gas. Spare parts are very cheap and easy to replace.

No. Many of these coolers are industrial and commercial units, used in agriculture, greenhouses, factories and industrial buildings, livestock, stables, poultry farms and dairy farms. In many of these places, and also outdoors or in open spaces, conventional air conditioning does not work well: the evaporative cooler is the most effective and economical solution. They are also increasingly used in public spaces that attract large crowds: sports halls and gyms, schools and universities, events and public gatherings, stands and trade fairs, festivals, and restaurant and bar terraces. These are large, open spaces, or spaces with doors and windows left open, where conventional air conditioning is expensive and ineffective. With evaporative cooling, the air is constantly renewed and freshened using little energy, without having to close off the space. They are also easy to install or move, so they suit both permanent installations and temporary activities such as trade fairs and events.

PARS EcoTech is a company based in Málaga, Spain.

By phone on +34 640 613 342, by email at comercial@pars-ecotech.com or from the contact page.

Chosen and certified by the University of Málaga for use in low-energy building projects.

It works best in dry heat and in ventilated spaces: water evaporates easily and the air comes out cooler. In high humidity, for example on the coast on muggy days, the effect is smaller. And on a very open terrace it cools the area near the unit, not the whole terrace. Before deciding, check the effect in your city with the calculator on the products page, or write to us and we will explain it frankly.

The ECOsport-5000 is the new generation of PARS EcoTech portable evaporative air coolers, designed to provide efficient, quiet thermal comfort in spaces of up to 50 m². Its sporty, elegant matt black design not only adds style but also hides dirt and signs of wear, keeping it looking immaculate at all times.

See the model page

Cooling coverage: up to 50 m²; Power consumption: 280 W; Water consumption: 4–6 L/h.

Airflow: 5,000 m³/h; Cooling coverage: up to 50 m²; Power consumption: 280 W; Water consumption: 4–6 L/h; Water tank: 50 L; Fan speeds: 3; Fan type: Centrifugal.

See the model page

The ECOlounge-6000 has been designed specifically to meet the demands of the hospitality sector, offering an efficient, elegant and sustainable way to lower high temperatures in dining areas, terraces and high-traffic spaces.

See the model page

Cooling coverage: up to 60 m²; Power consumption: 500 W; Water consumption: 6–8 L/h.

Airflow: 6,000 m³/h; Cooling coverage: up to 60 m²; Power consumption: 500 W; Water consumption: 6–8 L/h; Water tank: 100 L; Fan speeds: 15; Fan type: Centrifugal.

See the model page

The ECOsport-6000 is the evolution of PARS EcoTech portable evaporative air coolers, designed to provide efficient, quiet thermal comfort in spaces of up to 70 m². Its sporty, elegant matt black design keeps it looking immaculate, hiding dirt marks and giving it a modern, attractive finish.

See the model page

Cooling coverage: up to 70 m²; Power consumption: 350 W; Water consumption: 6–8 L/h.

Airflow: 6,000 m³/h; Cooling coverage: up to 70 m²; Power consumption: 350 W; Water consumption: 6–8 L/h; Water tank: 70 L; Fan speeds: 3; Fan type: Centrifugal.

See the model page

The ECO-9000 is an evaporative air cooler designed to offer an efficient, sustainable and versatile answer to high temperatures, generating a steady flow of fresh, humidified, healthy air. With a cooling capacity of up to 90 m², it is the ideal choice for large spaces that need thermal comfort with low energy consumption.

See the model page

Cooling coverage: up to 90 m²; Power consumption: 400 W; Water consumption: 4–6 L/h.

Airflow: 9,000 m³/h; Cooling coverage: up to 90 m²; Power consumption: 400 W; Water consumption: 4–6 L/h; Water tank: 70 L; Fan speeds: 3; Fan type: axial.

See the model page

The ECO-12000 is one of the most versatile evaporative air coolers and PARS EcoTech’s bestselling model, thanks to its perfect balance of power, energy efficiency and adaptability.

See the model page

Cooling coverage: up to 130 m²; Power consumption: 450 W; Water consumption: 8–10 L/h.

Airflow: 12,000 m³/h; Cooling coverage: up to 130 m²; Power consumption: 450 W; Water consumption: 8–10 L/h; Water tank: 60 L; Fan speeds: 3; Fan type: Axial.

See the model page

The ECO-15000 is a high-capacity evaporative air cooler designed for maximum performance, energy efficiency and long running times, producing a steady flow of fresh, humidified, healthy air. With coverage of up to 160 m², it is an ideal solution for industrial, commercial and hospitality applications, both indoors and outdoors.

See the model page

Cooling coverage: up to 160 m²; Power consumption: 750 W; Water consumption: 12–15 L/h.

Airflow: 15,000 m³/h; Cooling coverage: up to 160 m²; Power consumption: 750 W; Water consumption: 12–15 L/h; Water tank: 200 L; Fan speeds: 3; Fan type: Axial.

See the model page

The ECO-18000 is an industrial-grade, high-performance evaporative air cooler designed to deliver powerful, efficient and sustainable cooling in large spaces of up to 190 m². This model is designed especially for demanding industrial and commercial environments, such as industrial warehouses, mechanical workshops, factories and large storage facilities, where reliable, continuous cooling is required.

See the model page

Cooling coverage: up to 190 m²; Power consumption: 750 W; Water consumption: 10–15 L/h.

Airflow: 18,000 m³/h; Cooling coverage: up to 190 m²; Power consumption: 750 W; Water consumption: 10–15 L/h; Water tank: 60 L; Fan speeds: 3; Fan type: Axial.

See the model page

The ECO-22000 is an industrial-grade, high-performance evaporative air cooler designed to deliver powerful, efficient and reliable cooling in large spaces of up to 240 m². This model is designed especially for very demanding industrial environments, including large factories, industrial warehouses, construction sites and large commercial premises, where a constant, even airflow is required.

See the model page

Cooling coverage: up to 240 m²; Power consumption: 1,100 W; Water consumption: 15–20 L/h.

Airflow: 22,000 m³/h; Cooling coverage: up to 240 m²; Power consumption: 1,100 W; Water consumption: 15–20 L/h; Water tank: 126 L; Fan speeds: 3; Fan type: axial.

See the model page

The ECOsport-23000 is an industrial-grade, high-performance evaporative air cooler developed by PARS EcoTech, designed to deliver maximum cooling power across large areas of up to 260 m². With an impressive airflow of 23,000 m³/h, this model is built for demanding environments that call for continuous performance, robustness and energy efficiency.

See the model page

Cooling coverage: up to 260 m²; Power consumption: 1,500 W; Water consumption: 10–15 L/h.

Airflow: 23,000 m³/h; Cooling coverage: up to 260 m²; Power consumption: 1,500 W; Water consumption: 10–15 L/h; Water tank: 126 L; Fan speeds: 3; Fan type: Centrifugal.

See the model page

The ECO-26000 is the most powerful evaporative air cooler from PARS EcoTech, designed to deliver extreme, efficient and continuous cooling in spaces of up to 280 m². This model is ideal for very demanding industrial environments, including large factories, industrial warehouses, heavy-duty workshops, construction sites and large-scale projects, where a constant airflow and even cooling are needed across extremely large areas.

See the model page

Cooling coverage: up to 280 m²; Power consumption: 1,500 W; Water consumption: 18–24 L/h.

Airflow: 26,000 m³/h; Cooling coverage: up to 280 m²; Power consumption: 1,500 W; Water consumption: 18–24 L/h; Water tank: 126 L; Fan speeds: 3; Fan type: Axial.

See the model page

The ECOwall-6000 is the world’s only wall-mounted evaporative air cooler, designed exclusively by PARS EcoTech to deliver efficient, elegant cooling in spaces where fixed air conditioning, ducting or ceiling units cannot be installed. Thanks to its smart design, all you need to do is make a small opening in the wall to install it, giving a steady flow of fresh, humidified, healthy air without compromising the look of the space.

See the model page

Cooling coverage: up to 80 m²; Power consumption: 220 W; Water consumption: 8–10 L/h.

Airflow: 6,000 m³/h; Cooling coverage: up to 80 m²; Power consumption: 220 W; Water consumption: 8–10 L/h; Water tank: 10 L; Fan speeds: 3; Fan type: axial.

See the model page

AguaPARS offers atmospheric water generators: machines that produce drinking water from the moisture in the air. A way to have water at home or on site without relying on plastic bottles.

FunXPad is a multi-touch game table designed for playing together. A leisure option for venues, lounges and meeting spaces.

FUN4FOUR covers the earlier game tables made by PARS EcoTech. Its website offers spare parts and technical service for those machines.